LEER Locker Storage System | Truck Bed Organization Solutions
We designed the LEER Locker to solve the chaos of loose tools, gear, and equipment rolling around your truck bed. This modular storage system features lockable drawers and adjustable shelving that mount securely to your bed rails or tie-down points. Whether you’re a contractor hauling power tools to job sites or an outdoor enthusiast keeping camping gear organized, the Locker gives you commercial-grade security and weatherproof protection.
The system is built from powder-coated aluminum with reinforced corners and full-extension drawer slides rated for 150 pounds per drawer. Stack multiple units, mount them side-by-side, or configure a custom layout that adapts as your cargo needs change. Every drawer locks independently with weather-sealed gaskets to keep moisture and dust out.
- Powder-coated aluminum construction with reinforced corner brackets
- Full-extension drawer slides rated for 150 lbs load capacity per drawer
- Independent keyed locks on each drawer with weather-sealed gaskets
- Universal mounting system fits most truck bed rail and tie-down configurations
- Modular design allows stacking and side-by-side installation
Installation & Mounting Options
The LEER Locker mounts directly to your truck bed using three proven methods: rail clamps for stake pocket beds, bolt-through kits for beds with pre-drilled tie-down points, or adhesive-backed track systems for smooth bed floors. We include all mounting hardware and a drill template with each unit.
Installation typically takes 30-45 minutes with basic hand tools. The rail clamp system requires no drilling and can be repositioned or removed without leaving permanent marks. For maximum security on work trucks, we recommend the bolt-through kit, which anchors each corner directly into the bed floor with stainless steel carriage bolts. The adjustable feet on each unit compensate for uneven bed surfaces and allow you to level the drawers even when the truck is parked on a slope.
Drawer Configuration & Load Management
Each LEER Locker drawer rides on commercial ball-bearing slides that extend fully for access to the back corners. The 150-pound load rating applies when the drawer is properly mounted and the weight is distributed evenly—we’ve tested these slides through 50,000 open-close cycles without failure.
Inside each drawer, you’ll find pre-drilled mounting points for our optional divider kit, which includes adjustable partitions and small-parts trays. The drawer floor is textured to prevent tools from sliding during transport, and the 3-inch side walls keep items contained even when you’re driving on rough terrain. For contractors carrying loose fasteners or electrical components, the snap-in tray system creates dedicated compartments without tools.
Weatherproofing & Security Features
Every drawer in the LEER Locker system seals with a continuous EPDM rubber gasket that compresses when you turn the key. This creates a moisture barrier that keeps rain, snow, and road spray out even during highway driving. The keyed locks use a tubular cylinder design that resists picking and drilling—each lock is weather-sealed at the keyway to prevent water intrusion and corrosion of the internal pins.
We key all locks in a single unit to the same code, so one key opens every drawer. If you order multiple units at once, we can key them alike at no charge—just note your request during checkout. For fleet managers or businesses with multiple trucks, we offer master-key options that allow a supervisor key to open all Lockers across your vehicle fleet while giving individual drivers keys for their assigned units only.
Complete Your LEER Storage Setup
What people are saying
Common Questions About the LEER Locker System
Yes, the adjustable mounting feet compensate for the extra thickness of spray-in bedliners. The rail clamp system works with most spray-in and drop-in liners without modification. If your liner covers the stake pockets, we recommend the bolt-through mounting kit, which anchors directly through the liner into the bed floor. The mounting hardware includes longer bolts specifically for this application.
Most customers install the LEER Locker themselves using basic hand tools—a socket set, drill, and level are all you need. The rail clamp option requires no drilling and takes 30-45 minutes. The bolt-through kit involves drilling four holes per unit and takes about an hour. We include a drill template and detailed instructions with photos. Professional installation is available through our dealer network if you prefer, typically costing $150-200 for labor.
Each drawer is rated for 150 pounds of evenly distributed weight when properly mounted. The ball-bearing slides are the limiting factor—overloading causes premature wear and binding. For heavy items like hydraulic jacks or battery packs, we recommend distributing them across multiple drawers or placing them toward the front of the drawer near the slide mounts. The drawer floor itself is rated for 200 pounds, so the structural limit is higher than the slide rating.
Yes, the tubular lock cylinders are fully sealed against moisture and tested to IP65 standards. The EPDM gasket around each drawer creates a weather barrier when locked. We recommend lubricating the locks twice a year with graphite powder or dry PTFE spray—avoid oil-based lubricants that attract dust and can gum up in freezing temperatures. Customers in coastal and snow-belt regions report no corrosion issues after multiple years of exposure.
Yes, the stacking kit allows you to securely mount one Locker on top of another. The kit includes alignment pins that prevent lateral movement and through-bolts that lock the units together. We’ve tested two-unit stacks extensively, and the combined assembly maintains the same 150-pound per-drawer rating. Three-unit stacks are possible in long-bed trucks but require additional bed-floor anchoring to prevent tip-over during aggressive cornering or off-road use.
All drawers in a single unit come keyed alike—one key opens every drawer. If you purchase multiple units at the same time, we can key them all to match at no charge; just request this during checkout. Each drawer locks independently, so you can secure just the drawers containing valuable items and leave others unlocked for faster access to frequently used gear. For fleet applications, we offer master-key systems where a supervisor key opens all units while individual driver keys work only on assigned Lockers.
The LEER Locker is designed to fit under most tonneau covers and truck caps without interference. Standard drawer units are 12 inches tall, leaving plenty of clearance under folding, rolling, and retractable covers. If you have a low-profile cap or cover, measure the interior height before ordering—we can confirm fitment based on your specific setup. Many customers combine the Locker with our caps to create a fully enclosed, weatherproof storage system that maximizes bed space while keeping gear secure and organized.